ASTM B368 (ISO 9227 CASS) CASS-test; VDA 621-415; SAE J2334; VW PV1210; DIN 50017; IEC 60068; Renault ECC1; GM 14872; Nissan CCT1; Our laboratory is ISO 17025 accredited for a number of tests. Please click the link below to find more information with regard to the scope of our ISO 17025 accreditation.
A2LA Accredited Proficiency Testing - ATC Test LabOur staff includes the current chairman for ASTM B117 as well as the SAE ACAP committee sponsoring SAE J2334. Only proficiency testing provider with A2LA accreditation. We offer more comprehensive corrosion proficiency tests than most other labs. Most cost effective price for proficiency testing.
CYCLIC TESTS Volvo outdoor SCAB test Simulated Corrosion Atmospheric Breakdown SAE J2334 Cosmetic Corrosion Lab Test, 80 cycles = 5 yrs on vehicle testing GMW14872 Cyclic Accelerated Corrosion Testing Formerly GM9540P 60 cycles = 10 years)
Corrosion testing and environmental testingAccelerated Corrosion Testing. Cyclic corrosion tests (CCTs) are intended to produce failures representative of the type found in outdoor corrosive environments. They expose specimens to a series of different environments in a repetitive cycle. Simple corrosion testing like Prohesion may consist of cycling between salt fog and dry conditions.
Cyclic Salt Corrosion Equipment - Industry Leader in This option is often used when tests such as the SAE J2334 require a controlled RH condition in the test profile. With this option the chamber can control percent RH from 30 95% (+/- 5%) as limited by a 22oC dew point and current laboratory conditions.
SAE J2334 Laboratory Cyclic Corrosion Test; Ford CETP 00.00 L-467 Global Laboratory Accelerated Cyclic Corrosion Test; Honda CCT; Tesla TP-0000808 Cyclic Corrosion Resistance; Volvo 423-0014 Accelerated corrosion test; VDA 233-102 Cyclic corrosion testing of materials and components in automotive construction
Environmental Testing Laboratory - ATC Test LabPricing starts as low as $2.00 per hour for simple single environment testing. Most cyclic corrosion tests are run at $4.00 per hour. Below is a list of our certified capabilities. Acetic Acid Salt Spray; Coating Evaluation Blisters, corrosion and creep back; Conductivity ASTM D1125; C.A.S.S (copper accelerated acidic acid salt spray) Conductivity
SAE J 2334-2003 (SAE J2334-2003) - Laboratory Cyclic SAE J 2334-2003 (SAE J2334-2003) Laboratory Cyclic Corrosion Test. The SAE J 2334 lab test procedure should be used when determining cosmetic corrosion performance for a particular coating system, substrate, process, or design. Since it is a field correlated test, it can be used as a validation tool as well as a development tool.
Laboratory cyclic corrosion testuse and factors to consider:SAE J2334 is a method which specifies the test conditions that are required to perform a cyclic corrosion test that replicates, on an accelerated basis, an outdoor exposure. Actually, this protocol relies on three periodic segments:the humid, the spray application and the dry stages. The wet and the dry part of the cycle are there to mimic the natural
SAE J2334 :Laboratory Cyclic Corrosion TestDescription / Abstract:SAE J2334, 2016 Edition, April 2016 - Laboratory Cyclic Corrosion Test The SAE J2334 lab test procedure should be used when determining corrosion performance for a particular coating system, substrate, process, or design. Since it is a field-correlated test, it can be used as a validation tool as well as a development tool.J2334A:Laboratory Cyclic Corrosion Test - SAE InternationalThe SAE J2334 lab test procedure should be used when determining corrosion performance for a particular coating system, substrate, process, or design. Since it is a field-correlated test, it can be used as a validation tool as well as a development tool.