Download Citation Accuracy and mechanical properties of open-cell microstructures fabricated by selective laser sintering This paper investigates the applicability of selective laser sintering
Comparative analysis of the microstructures and mechanical The microstructures and mechanical properties of Co-Cr dental alloys were dependent on the fabrication techniques. The SLM specimens exhibited better microstructures and mechanical properties than those fabricated with CNC or CAST.
Strain rate and other time dependent mechanical nanopillars. behaviors, i.e. creep deformation, of bulk-scale tin have been stud- The mechanical properties of tin nanopillars with average diam- ied in detail by Sherby , Frenkel et al. , Weertman and Breen eters of 350 nm, 560 nm, and 920 nm were characterized by using , Breen and
Fabrication, microstructures, and properties of copper Nie J.H. et al., Fabrication, microstructures, and properties of copper matrix composites reinforced by molybdenum 403 theoretical bulk density. Tensile tests were performed using REGER-3010 apparatus under a crosshead speed of 0.5 mm/min at room temperature, and the hardness of the bulk
Microstructure and Mechanical Properties of CMSX-4 Single Jul 10, 2018 · Mechanical properties of SX CMSX-4 ® produced by selective electron beam melting (SEBM) have been studied in the as-built and fully heat-treated conditions and compared with conventional cast and heat-treated material. The microstructures of the SEBM and cast material differ in dendrite size by about two orders of magnitude with much smaller dendrite spacing in the SEBM
Aug 06, 2013 · Abstract. This work compares two metal additive manufacturing processes, selective laser melting (SLM) and electron beam melting (EBM), based on microstructural and mechanical property evaluation of Ti6Al4V parts produced by these two processes. Tensile and fatigue bars conforming to ASTM standards were fabricated using Ti6Al4V ELI grade material. Microstructural evolution was
Microstructures, mechanical, and biological properties of face using FSP to strengthen the surface properties and promote the osteogenic capacity of the material. The microstructures and mechanical properties and their relationship were thoroughly explored. In addition, the biological activity of the nanocom-posite surface was investigated both in vitro and in vivo. Methods Fabrication of Tc4/Zn MMNcMicrostructure and mechanical properties of electron beam Oct 15, 2020 · The microstructure and mechanical properties of the deposit were investigated. The following conclusions can be drawn:(1) For EBF 3 TiB 2 /ZL205 composite, -Al, Al 2 Cu and TiB 2 were the main phase. VB 2 also can be confirmed to exist in the component. The -Al phase was mainly in the matrix, while, Al 2 Cu and (Ti, V)B 2 distributed along the grain boundary.