Inconel 625 is a nickel-base alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium. Alloy 625 has excellent weldability and is frequently used to weld AL-6XN® alloy. Matching filler metals are also used to join dissimilar
Alloy C276 - Corrosion Resistant Nickel Alloy Plate Alloy C276 nickel alloy plate (UNS N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy which is among the most corrosion-resistant alloys currently available. The high molybdenum content imparts resistance to localized corrosion such as pitting.
Copper-nickel alloys 90-10 C70600 10 - - - Bal 1.2 B171 B466 70-30 C71500 31 - - - Bal 0.8 B171 B466 a - UNS numbers beginning with an N indicate a nickel alloy, but the definition of a nickel alloy is different than that used by ASTM. b - in ASTM specifications, most nickel alloys fall
Engineering with CLAD STEEL - Nickel InstituteA264 (Stainless chromium-nickel steel clad plate, sheet and strip) and ASTM A265 (Nickel and nickel-base alloy clad steel plate) and JIS G3602 (Nickel and nickel alloy clad steels). Clad plate has been used extensively worldwide for many processing vessels, separators, contactors, heat exchangers and pipe etc. (Figure 1).
HPAlloy alloy 625Description. Nickel-chromium-molybdenum alloy 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Highly resistant in a wide range of organic and mineral acids. Good high temperature strength.
alloy 625 specialmetals INCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and out-standing corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Composition is shown in Table 1. Strength of INCONEL alloy 625 is derived
Nickel and High Temp Alloy Rounds On Continental Steel It offers outstanding thermal fatigue strength over a wide range of temperatures ranging from cryogenic to 1800 ºF (982 ºC). Nickel Alloy 625 is also resistant to oxidation as well as other corrosive elements. Nickel Alloy 625 is made with a minimum of 58% Nickel
Shaw Stainless Line Card - Stainless and AlloyAlloys Stainless Steel 304/L / 310 / 316/L 317L / 321/H / 347/H / 410S / 904L 2205 / 2207 / 254 SMO / 17-4 PH Carbon Steel:A105 / A106 / A234 Aluminum:6061 T6 / 6063 T6 Chrome Moly:11 / 22 / 5 / 9 / 91 Nickel Alloys:Alloy C276 / Alloy 20 Alloy 200/201 / Alloy 400 / Alloy 600 Alloy 625 / Alloy 800 / Alloy
316L is the low carbon version of 316. 316L is a chromium-nickel-molybdenum austenitic stainless steel. Improved general corrosion and chloride pitting resistance to 304/304L. It provides higher creep, stress-to-rupture and tensile strength at elevated temperatures. UNS S31603
Stainless Steel Sheet, Plate and Coil, Stainless Steel Stainless steel is a corrosion resistant steel alloy with a minimum of 10.5% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented.
Welding Guidelines for Stainless Steel and Nickel AlloysDO NOT use stainless steel filler metals for joining stainless steel to nickel base alloys as there is a very high risk for centerline cracking. This is due to dilution out of the nickel side of the joint. Higher nickel in the stainless weld deposit creates an imbalance in the
Your Corrosion Resistant Nickel Alloy Many of Corrosion Materials customers commonly work with carbon steel, carbon alloy, stainless steel and aluminum. However, these alloys may not hold up in harsh environments, such as aggressive media, elevated temperatures or a combination of the two.Applications of nickel alloys for - Stainless Steel WorldFeb 05, 2020 · Figure 5 illustrates a dual plate check valve with a carbon steel body and martensitic stainless disks which are closed through the Inconel X750 spring. Nickel alloy materials Inconel 625 (Alloy 625) is a nickel-based alloy with high corrosion resistance and mechanical strength. This material has 22% chromium, 9% molybdenum, and around 58% nickel.